Members Only
Best Seller

Multi Needle Felting Tool

$28.00

The Multi Needle Tool holds from 1 to 6 felting needles in any required configuration allowing easy, fast and safe insertion and removal of needles. (needles sold separately)

Best Seller

Frequently Purchased Together

6 Felting Needles

6 Felting Needles | Size 38 Triangle

Specifications:

  • Shank (A): 15-gauge for added strength and durability.
  • Total Length (B): 3 inches, offering comfort and control for extended use.
  • Barb Spacing (C): 3.18 mm between barbs for consistent fiber engagement.
  • Tip to First Barb (D): 3.18 mm, allowing for smooth insertion and effective felting right from the tip.
  • Barb Arrangement: 222 configuration, with two barbs evenly spaced on each side for balanced and efficient felting.
  • Working Part Cross-Section: Standard triangular design, ideal for general felting tasks.

This needle’s durable construction and precise barb arrangement make it a go-to choice for felters of all skill levels. Pair it with Bear Creek’s superior wool for projects that are firm, smooth, and built to last.

Perfect size to use with the Multi Needle Holder!

*Includes 6 needles

Case for Needle Felting Tools

Keep your needles safe with this leather and felt carrying case for our felting needles and holders. (Colors will vary from those pictured)

SPECIFICATIONS

Additional information

Weight 2 oz
Dimensions 3 × .5 × .5 in
Color

Blue, Gold, Polished Silver, Anodized Red

ABOUT THE PRODUCT

I have tried many needle holders over the years and this is the tool I recommend for all of my needle felting students.

The Multi Needle Tool holds from 1 to 6 felting needles in any required configuration allowing easy, fast and safe insertion and removal of needles.

I recommend using size 38 needles with this tool. Needles are not included with this tool; they must be purchased separately.

The ergonomic design ensures that the tool fits the user’s hand comfortably, with the entire needle shank held within the tool, providing the shortest distance between fingers and felt. Requiring minimal gripping effort, this tool provides you with a high level of control and precision in your work.

The design also ensures that all the needles are held exactly parallel, eliminating divergence of the needles, reducing the effort required and minimizing needle breakage. The tools unique roll resistance means it stays where you put it without rolling off the table.

 

Needle placement description.

Warning the needles are very sharp.

Always Have the holder pointing away from your body when inserting or removing needles.

SCMFT_clip_image003

To insert needles

First support the holder in both hands with the slotted end away from your body. Use both thumbs to roll the middle “O ring” from its groove and slide the ring towards the head of the tool till it almost reaches the front “O ring”.

 

 

SCMFT_clip_image004

Next

Hold the needle by its head and slide the needle away from you under both rings. When the head of the needle lines up with the “O ring” groove rotate the head into the groove.

 

 

SCMFT_clip_image005

Last step

Slide the “O ring” back into its groove covering the needle heads. Roll the tool between your fingers to push needle heads into the bottom of the groove.

To remove needles

Roll and slide centre “O ring” away from you as before, now apply light pressure to the needle towards the middle of the tool where the needle protrudes from the holder, this will lift the needle head from its groove allowing the needle to be withdrawn.

Maintenance

A Very light spray then wipe with CRC, WD40, or similar lubricant will protect and nourish the rubber “O rings” and assist in preventing corrosion of the needles

You may also like…

Most Viewed Products

0